Product Manual

25
An indicator light will tell you when there is no more water in the
cleaner (E-fig. 2) If this happens the boiler stops heating automatically.
WHAT TO DO
- Switch off the heating switch.
- Continue working to use up any remaining steam in the boiler. If this is not done, you
will not be able to open the self-locking refill cap.
- Switch off the main switch and remove the plug from a socket.
- With a towel to protect your hand carefully unscrew the self-locking cap and let any
remaining steam escape.
- Remove the safety cap.
- Fill the boiler with water as described at point “Setting up/How to fill the tank” (page 7)
- Re-connect the appliance and start up as described at point “How to start up”(page 8).
DESCALING (fig. 14)
(every 3-4 weeks)
ATTENTION:
Never descale
the appliance
when still warm.
- Unplug.
- Fill the boiler with tap water.
and nothing else
- Hold the appliance
upright and shake
thoroughly until any
scaling comes away.
- Open the drain at the bottom of the tank (L) using the key on the safety cap.
- Collect the water draining from the tank.
- Rinse the boiler repeatedly with tap water (without adding other substances) until
- there are no further traces of scaling.
- Close correctly the drain at the bottom of the boiler (L).
CLEANING THE APPLIANCE
Clean the appliance and accessories with a damp cloth. Never use steam or immerse in
water.
How to Refill During Use
Fig. 14
MAINTENANCE