Product Manual A

26
- When the appliance has just been started up, condensation can occur in the cold
accessories. Before cleaning, adjust the steam in position 2-3 and depress the trigger for a
few seconds to drain any condensed steam that may be in the hose.
- Never use the appliance to clean materials that are not heat-resistant.
- Never leave the steam switch in position 3 for long usage. P
osition 2 is the standard
setting, it is sufficient for most tasks and consumes less energy.
- If the soiled area is difficult to clean, it will require more time and more cloths during the
cleaning process.
GENERAL INFORMATION
E
LECTRICAL SPECIFICATIONS
120V 60Hz
170 0 watts
56 psi
Nominal Voltage
Nominal powerpo
Steam pressuree
Appliance Specifications
Dimensions:
Height
Width
Length
Pover cord
Body material
Boiler material
No. of switches
Steam
adjustments
No water signal
10 inches
11inches
17 inches
13 feet
Plastic
304 stainless steel main boiler
2 on the handle, multiple on unit
3 settings on the handle
Indicator
light on the unit
After Cleaning
- Always switch off the heating switch.
- Let
all the steam escape: the safety/refiller cap will not open otherwise.
- Switch the main switch off.
- Unplug from the outlet
- Before storing, let the unit cool down completely.
- If you do not intend to use the appliance for 2 weeks, GUDLQ any remaining water in
the unit as described in the “Descaling” instructions above.