Instructions / Assembly

Page 4Rev. 030620
1-888-651-3431
Step 3. Attach the ramp to the basket assembly using the M8x60 bolts and nuts. Secure using two
13mm wrenches.
Step 4. Attach the connecting brackets (K) to the top corners of the basket assembly using a10mm
wrench and 4mm Allen wrench.
Step 5. Attach the eye bolt tie-down loops to the basket assembly using a 10mm wrench.
Step 6. Fold up the ramp and secure it in place. With the ramp folded up, place the U-pins attached
to the top frame into the slots on the connecting brackets. Place the U-pins so that the hole is outside
the ramp. Secure in place with the pin clips (L).
(3a)
(4-5)
(5)
(6a)
(6b)
(4)
(3b)