User Manual

RUDDER CONTROL PRACTICE
PRECISION CONTROL PRACTICE
DIRECTIONAL CHANGE AND HOVERING PRACTICE
1. Slowly raise the throttle stick.
2. Move the nose of the drone right or left. Then slowly move the
rudder stick in the opposite direction to fly back to the original
position.
Once you are familiar with all actions from the above exercises,
practice within a circle to improve your accuracy. Reduce the size
of the circle as you become more familiar with the controls.
Once you are familiar with the above exercises, stand by the
drone and continue practicing. Then repeat the exercises by
standing in front of the drone.
Slowly raise the throttle stick as the drone lifts off the ground.
You can use the pre-programmed movements to correct the
actions. These controls are the slider bars next to the throttle and
directional control pads.
1. Correcting using Rotational movement
As the drone lifts off, the nose may lean left or right.
When the drone leans right, adjust the trim to left side.
When the drone leans left, adjust the trim to right side.
2. Correcting using Forward/Backward Tilt movement
As the drone lifts off, the nose may lean forward or backward.
When the drone leans forward adjust the tilt back.
When the drone leans backward, adjust the tilt forward.
3. Correcting using Side Step Movement
As the drone lifts off, if the unit may shift left or right.
When the drone shifts right, side step to left side.
When the drone shifts left, side step to right side.
21