User Manual

CHARGING DRONE BATTERIES

USE THE WALL CHARGER TO CHARGE

THE DRONE BATTERY

3.7V 300mAh Li-Polymer Battery

LED Indicator

USB Charging Cable

1. Separate the battery cable and connect it to the charger.

2. Use the USB charging cable to connect the battery to a USB

power source, such as a laptop. A full charge takes about 40

minutes. After fully charged, the drone will fly about 5 minutes.

3. The A/B indicator match the A/B charging status. When

charging, the relevant indicator will light up. After charging, the

USB LED indicator will be off, unplug the USB charging cable

to finish charging. Do not attempt to overcharge the battery.

4. Only use the supplied Li-Polymer battery. Using any other

battery may damage the drone.

5. Only use included USB cable and charger to connect the drone

for charging.