User manual

12
ARGOS - USER MANUAL
The ARGOS is inserted in the audio chain between the source (mixing desk or preamplifier) and
the amplifier(s). If one uses an active system (separate amplifiers for different frequency ranges),
the output of the ARGOS should be connected to the input of the electronic cross-over.
See the figures below on how to connect the ARGOS in the audio chain for the 3 different opera-
tion modes :
Power
A m p lifie r
R
L
R
L
Low
Mid
High
Power
Amplifiers
Crossover
R
L
OR
Source :
Mixing d esk,
Prea mplifier
To pow e r
outlet
L
R
R
L
rgosA
APEX N.V. BELGIUM
TO EXT EN SIO N
LE FT
BA LANC ED
RIG H T
BA LANC EDUN BALA NCED
LE FT
BA LANC ED
RIG H T
BA LANC EDUN BALA NCED
Microphone based operation mode
Loudspeaker based operation mode
Line based operation mode
12