User`s manual

Operation 2011-09-30

Connecting the Probe Cord

1. Insert the probe cord completely into the jack on the left

side of the Root ZX mini.

NOTE

• Handle the Root ZX mini carefully; do not drop, bump or

expose the unit to other kinds of impacts or shocks. Rough

handling could cause damage.

• Make sure the probe cord plug is securely plugged into the

jack. A poor connection can prevent measurement.

• Do not drop anything on or bang the probe cord plug after

it has been inserted into the jack.

2. Insert the file holder’s gray male plug into the gray female

connector on the probe cord. Insert the contrary electrode

into the white female connector on the probe cord.

NOTE

Make sure to match colors of the file holder and contrary

electrode to the probe cord.

Measurements cannot be made if these connections are

reversed.

Checking the Function

1. Press the Power switch to turn the unit on. The display

will appear in the LCD screen.

* The instrument turns itself off if it is not used for 10

minutes.

NOTE

The unit may turn off if its side is bumped.

2. Check that the probe cord is properly plugged into the

jack.

3. Check that the file holder and contrary electrode are

properly connected to the probe cord.

4. Touch the metal part of the file holder with the contrary

electrode. Check that all the meter indicator bars on the

display light up.

File Holder

Contact

Contrary

Electrode

Probe Cord

Connector (gray)

Contrary

Electrode

File Holder

Plug

Probe Cord

Connector (white)