User`s manual

Operation 2011-09-30

Before Using the Unit

NOTE

Root ZX mini is shipped without the batteries installed. Remove the cover and install the 3 LR03 (AAA

size) batteries.

Installing the Batteries

1. Slide the cover in the direction by the arrow in the

illustration and remove it from the RooT ZX mini.

2. Insert the 3 LR03 (AAA size) batteries included in the

package.

(1) Insert the batteries by first pressing center of the minus

end against its spring contact.

(2) Slide the plus end down into place and make sure the

contacts are not bent or damaged.

NOTE

• Do not reverse the plus and minus poles.

• Never allow the spring contact to push against the edge of

the battery. This could damage the outer cover causing a

short or a leakage of battery liquid.

3. Slide the cover all the way down until it is securely closed.

NOTE

After installation, give the cover a light tug to confirm it is

securely attached.

BAD