User`s manual

Operation 2011-09-30

3. Clip the file holder to the metal shaft of the file.

(1) Press in direction of arrow with the thumb.

(2) Clip file.

(3) Release thumb.

NOTE

Always clip the file holder to the upper part of file shaft, near

the handle. The metal and plastic part of the file holder can

be damaged if they are attached to the file’s cutting part or

the transition to the cutting part.

NOTE

• Use files and reamers with plastic handles only. If the

file has a metal handle, electrical leakage will occur when

the handle is touched by fingers and it will prevent an

accurate root canal measurement. Even if the file handle

is made of plastic, make sure not to touch the metal part of

the file with finger.

• Do not use damaged file holders. An accurate

measurement cannot be made using a damaged file holder.

• Clip the file as shown in illustration #1 to the left. If the

file is in the position shown in illustration #2, it may not

make a correct measurement and the file holder could be

damaged.

File Holde

Press

File or Reame

Cutting part

and transition

to cutting part

Do not clip

onto this part!

Handle

Metal part of

file holder

BAD

GOOD