Instruction manual

Revision 6.0 APEX LITE SERIES DVR
58
6. SYSTEM ALARM
The DVR uses various event sources for system alert.
SYSTEM ALARM SOURCE
HDD FAIL Sends an alert incase of hard disk fail or errors
HDD ALMOST FULL Sends an alert when HDD is almost full based on DISK UTILITY configuration
PASSWORD FAIL Sends an alert incase of login attempt fails
DDNS REG-FAIL Sends an alert when DDNS registration fails
VIDEO LOSS
Sends an alert incase of video loss (*a camera must set to USE OFF from the
DEVICE menu in order to bypass the VIDEO LOSS)
SYSTEM ALARM METHOD
WANING MESSAGE Pop-up message
BUZZER Audible buzzer built-in to the DVR
SEND E-MAIL
Sends e-mail based on the configuration of NOTIFICATION under NETWORK menu
RELAY-4 ON Triggers relay 4
*HDD ALMOST FULL is only functional when HDD OVERWRITE is set to OFF.
7. STATUS OVERVIEW
STATUS OVERVIEW displays
Current record settings, Host Name, Firmware Version, Total
HDD Size, Free Space, and the status of the installed HDDs.
When the DVR cannot detect a hard disk drive, the corresponding
drive port is displayed in red.