Instruction manual

Revision 6.0 APEX LITE SERIES DVR
56
4.1 DISK MANAGER
Disk Manager is used to format/reuse a hard disk drive, as well
as to check the presence of Bad Blocks on the HDDs.
Status description:
ON: the disk is physically connected and ready to record
OFF: the disk is physically connected but not ready to record.
NO: the disk is physically NOT connected
* DVD-RW always indicates as OFF.
* Recording must be stopped to access DISK MANAGER
To format a hard disk drive, select OFF under STATUS, then
press ENTER. Select OK for format.
*If the hard disk was previously used from an APEX DVR and
want to reuse it, select CANCEL for reuse without disk format.
A disk can be removed for storing purposes.
Select ON under STATUS, then press ENTER.
Once a disk is removed, the STATUS changes to NO.
Select NO under STATUS, then press ENTER to remove the disk
from the list.
4.2 USB UTILITY
This menu allows users to update the firmware and load/save
settings with a USB thumb drive.