Instruction manual

Revision 6.0 APEX LITE SERIES DVR
44
MONITOR SELECT
MONITOR SELECT: MAIN MONITOR/ SPOT MONITOR(AL-400,800,1600),
MONITOR 1,2(AL-3200)
EVENT POP-UP
EVENT POP-UP INTERVAL:
Displays a camera(s) in full screen when an alarm
or motion triggers.
CAMERA SEQ CAMERA SEQUENCE INTERVAL
VGA MODE VGA DISPLAY MODE: 800x600, 1024x768, 1280x1024
COVERT CHANNEL LIST
CONVERT CHANNEL LIST: Configure channels to be hidden on LIVE and
PLAYBACK. The hidden channels are still being recorded.
Each monitor can have different set of hidden channels.
SEQUENCE TOUR LIST
SEQUENCE TOUR LIST: Customized tour mode up to 16 custom sets. Each set can
display from single camera display to 16 camera display mode.
MONITOR SWITCHING
MONITOR SWITCHING ON/OFF: Toggle between monitor 1 and 2 on MONITOR 1
and VGA output. (ONLY AVAILABLE IN AL-3200)
3. AUDIO
DVR allows user to synchronize audio channels with desired video
channel. Also, the Audio Gain level may be adjusted.
4. COM PORT
Configure devices such as PTZ cameras and Keyboard Controller
that utilize COM ports.
RS-232C is fixed for COM 1
RS-485 is fixed for COM 2 & 3
After making physical connection, Select the appropriate device
and then enter the corresponding baud rate, parity, stopbit, and
databit.
*COM1 can be connected directly to the serial port of the NUVICO junction box for NVCK-3X keyboard
controller for a direct communication.
5. TEXT INPUTS
Configure text input devices such as POS system.
COM1 must set to TEXT mode in order for the TEXT INPUTS
mode to function properly.
*APEX DVR supports VSI Pro from AVE in single and network
mode.