Instruction manual

Revision 6.0 APEX LITE SERIES DVR
37
1.2 MOTION
Enter desired FRAME RATE, QUALITY, PRE-RECORD, and
POST-RECORD settings for motion-based recording.
*The recording resolution follows by the CONTINUOUS record
mode.
USE
USE: Defines use of motion based recording.
If CONTINUOUS:OFF / MOTION:ON : the channel only records when motion is detected.
If CONTINUOUS:ON / MOTION:ON : the channel records based on the CONTINUOUS
record setup, it only changes its recording mode when motion is detected.
If CONTINUOUS:ON / MOTION:OFF : the channel always records as long as the
recording is on.
PPS RECORDING FRAME RATE
QUALITY
QUALITY:
Q1: Lowest quality
Q5: Highest quality
PRE PRE RECORDING TIME: Buffer recording time interval before the event occurs.
POST(sec) POST RECORDING TIME: Additional recording time after the event finishes.
NEXT PAGE: Go up or down for more menu pages.
SEARCH SEARCH BUTTON: After adjusting a value, press SEARCH button to apply to the rest.