Instruction manual

Revision 6.0 APEX LITE SERIES DVR
33
TELE, WIDE: Zoom in and out. Also used as a enter button on the PRESET, TOUR,
PATTERN and SCAN function setup menu.
FUNCTIONS: Used as an Iris Close/Open during IRIS mode. Also used as a focus Far/Near in
FOCUS mode.
In FOCUS mode it can be used as a ‘save & exit’ button in PRESET, TOUR, PATTERN and
SCAN function setup menu.
PRESET: Press desired preset number + PRESET button to run a preset.
Press this button to open a preset programming menu.
TOUR: Press desired tour number + TOUR button to run a tour.
Press this button to open a tour programming menu.
PATTERN: Press desired pattern number + PATTERN button to run a pattern.
Press this button to open a pattern programming menu.
SCAN: Press desired scan number + SCAN button to run a scan.
Press this button to open a scan programming menu.
Home: Press 1 + HOME button to run a home function.
SPEED CONTROL: Press desire number + SPD button to change control speed.
AUTO FOCUS/ AUTO IRIS
DELETE: Used to delete a preset.
PTZ: Enter or Exit from PTZ control mode.
MODE: Toggles between FOCUS and IRIS mode.
SHIFT: Press desired number and press this button to program a preset
NUMERIC BUTTONS: double click the video to display numeric keyboard. Right click to hide.
Press PTZ button to initiate PTZ function. The PTZ icon will appear
on the status bar. Thereafter, use the navigation buttons, as well as
Tele and Wide buttons, to control the PTZ camera.
In case using NUVICO protocol, the PTZ camera menu can be
accessed by pressing MENU button.