Caution Notice CAUTION WARNING: RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED PERSONNEL. The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference.
Safety Instructions 17) Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards. 18) Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
27) Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. 28) Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. If the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into theproduct. c. If the product has been exposed to rain or water. d.
Contents Caution Notice............................................................................................................................... 2 Safety Instructions.......................................................................................................................3-5 Remote Control Handset..............................................................................................................7-8 Controls......................................................................
2 3 5 4 6 7 8 11 12 9 10 13 14 16 18 15 17 19 21 20 22 23 23 Remote Control Handset 1 Controls 1. POWER To turn on LCD display. 2. MUTE / OFF Press to turn off the sound. Press again or press volume +/- to restore the original volume. 3. DISPLAY Press to display the current channel on screen. 4. CC Press to activate closed caption subtitles & teletext where available. 5. FREEZE Press to digitally freeze frame your signal source. Press again to return to live viewing. 6.
Battery Installation Remote Control Handset Your remote control handset is powered by two AAA type batteries. 1 To insert batteries, turn the remote control over and remove the battery cover. 2 Put the two batteries into the compartment with correct polarity. 3 Replace the cover. To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period of time. Do not mix batteries of different age and type.
3. Channel/Function 56 Press the 56 button to select the channel in TV mode, or to navigate in MENU mode. Controls of 2. MENU Activate the menu. Press the MENU button on the top left of the LCD TV to adjust your settings. Front & Top Panel 1. MAIN POWER Turn on/off LCD TV. Press the power button in the lower right corner of the television to turn on/off LCD TV. When power is on, the LED indicator turns green, then the screen image will appear in a few seconds.
Back Panel Connections of Power Cord Input YPbPr1 and Audio 1 & YPbPr2 and Audio 2 When connecting to YPbPr(R/L), you can use YPbPr component video sources such as a progressive DVD player, HDTV decoder or satellite receiver to obtain a picture with maximum resolution. For audio sound connect red and white audio cables. S-Video / Audio3 Input Connects to a DVD, set top box, or VCR when using S-Video (Y/C). For audio sound connect red and white audio cables.
2 Connecting Video Playback Equipment to TV Input Connecting Cable TV to TV Input 1. Connect the RF Out from your external video playback equipment (ie: VCR player) to the TV input on the back panel of the LCD TV. - For further information on cable TV, contact your local cable TV station. 2. Select channel 3 or 4. 1. If no cable set-top box is used connect coaxial cable from your existing cable outlet/antenna directly into TV Input.
External Equipment Connection to 3 For Good Performance Connecting Cable Set-Top Box/Video Equipment to Composite Video Input Connecting Video Equipment to S-Video Input How to connect Connect from video & audio output jacks on your ext. equipment to the LCD TV inputs labeled “AV IN” & “AUDIO 4” Note: If a 4:3 picture format is displayed, there may be black borders around the image. How to connect Connect from S-Video & audio output jacks on your ext.
6 For Best Performance Connecting Video Equipment to Component Video Input (YPbPr1, YPbPr2) Connecting Video Equipment to DVI Input (HDTV SET-TOP-BOX, HDTV Satellite Receiver, Personal Computer) - Connect to equipment using optional component video and red and white audio cables. - Connect to video equipment using optional DVI video cable and audio cable with 3.5mm stereo mini plug to two RCA connectors.
2200x1125 16:9 1920x1080 33.75 kHz, 60 Hz 1650x750 16:9 1080i 31 kHz, 60 Hz 33.75 kHz, 60 Hz 1280x720 720p 16:9 4:3 31 kHz, 60 Hz 704x480 480i 720x480 15 kHz, 60/50 Hz 15 kHz, 50/60 Hz 720x480 704x480 858x525 858x525 858x525 4:3 16:9 Aspect Ratio MODE (Optional 3.5mm stereo audio cable required) H/V Frequency How to use 1. Turn on the digital set-top box or your personal computer (Refer to the owner’s manual for the digital set-top box.) 2.
Once you’ve selected your desired sub-menu, press the3/4buttons and 5/6 buttons to select a desired setting, then press 3/4buttons to adjust. Display Highlight Contrast to increase or decrease the picture contrast. Highlight Brightness to make picture brighter or darker. Highlight Backlight to increase or decrease the intensity of light within the panel. Highlight Saturation to change the intensity of color. Highlight Hue to change colors towards a red or green tint.
AV Mode / S-Video Menu Adjustments 2 Menu adjustments are available to change the settings of your LCD TV to your preferences. To select AV or S-Video mode, press the INPUT button located on the remote or top of the LCD TV panel until desired mode is displayed. Press the MENU button. Use 5/6 button to select each sub-menu. Once you’ve selected your desired sub-menu, press the3/4buttons and 5/6 buttons to select a desired setting, then press 3/4buttons to adjust.
Display Highlight Contrast to increase or decrease the picture contrast. Highlight Brightness to make picture brighter or darker. Highlight Backlight to increase or decrease the intensity of light within the panel. Highlight Saturation to change the intensity of color. Highlight Hue to change colors towards a red or green tint. Highlight Sharpness to make the picture sharper or softer. Highlight Color Temp button to select “Cool” “Normal” or “Warm”.
VGA Mode Menu Adjustments 4 Menu adjustments are available to change the settings of your LCD TV to your preferences. To select VGA mode, press the INPUT button located on the remote or top of the LCD TV panel until VGA mode is displayed. Press the MENU button. Use 5/6 button to select each sub-menu. Once you’ve selected your desired sub-menu, press the3/4buttons and 5/6 buttons to select a desired setting, then press 3/4buttons to adjust.
To select DVI mode, press the INPUT button located on the remote or top of the LCD TV panel until DVI mode is displayed. Press the MENU button. Use 5/6 button to select each sub-menu. Once you’ve selected your desired sub-menu, press the3/4buttons and 5/6 buttons to select a desired setting, then press 3/4buttons to adjust. Display Highlight Contrast to increase or decrease the picture contrast. Highlight Brightness to make picture brighter or darker.
V-CHIP (all modes) Menu Adjustments TV Rating Y7 PG suitable for older kids parental guidance required parents should be aware if the programs are suitable for children MA adults only FV fantasy and violence some sexual content and dialogue D low level of content and profanity L Sex S Violence V 14 MPAA G Rating PG suitable for general audience parental guidance required suitable for kids less than 13 years PG-13 underparental supervision rated, children under 17 should be R accompanied by parents N
PIP Signal PIP Mode To Activate PIP Your LCD TV can display the main signal and an auxillary signal input simultaneously. The PIP signal appears in a small box within the screen when the PIP feature is activated. While your main signal is on, press PIP INPUT on the remote control. Refer to the chart at right as to the inputs allowed using PIP when viewing your main signal. As an example, we will use YPbPr1 mode as your main signal.
Description of View Modes View modes are available that allow you to watch normal 4:3 television broadcasts in several different ways to take advantage of the larger 16:9 display area on your LCD TV. Press VIEW repeatedly to access all modes. NOTE: When viewing programming in DVI mode the VIEW feature is not active. Normal 4:3 Mode: returns a standard 4:3 picture to its original size. Black bars are visible at left and right sides.
Problems Reasons Solutions No picture Did you connect the power cord? Did you turn on power? Is the signal line connected correctly? Is the screen under the energy-saving mode? • Unplug LCD TV for 30 seconds then replug. • Connect power cord correctly to a functioning wall outlet. • Turn on power; indicator will illuminate green. • Reconnect Antenna cable securely. • Press the INPUT button to cycle through the connected video sources.
Troubleshooting Guide We encourage you to visit our website at www.apexdigitalinc.com and review the customer support and FAQ pages for updates to this list. Register to validate your warranty at our website and order accessories for your product. Problems Solutions Are you in MOVIE, SPORT, GAME, or VIVID mode? Settings to certain adjustments are limited unless in USER mode. • Press PICTURE on the remote control to change mode to USER. Cannot receive certain channels.
TV unit dimension Pedestal Depth Aspect Ratio Number of Pixels Luminance Contrast Response Time Viewing Angle 32.7”(W) X 19”(H) X 3.25”(D) 9.
Limited Warranty Limited North American Warranty Apex Digital AVL2778 Apex Digital, Inc. expresses the following limited warranty. This warranty extends to the original consumer, purchaser or product received as a gift and no other purchaser or transferee. You must retain the original bill of sale for proof of purchase.
