User's Manual

Apex OutLook 140DX/180DX Switch User Guide
56
Firmware
To update firmware:
1 Connect the standard serial cable to the serial connector on the
PC computer and to the serial connector on the back panel of the
switch.
2 Navigate to the drive where you have saved the firmware update.
3 Double-click to open the file WUpDate.exe.
4 In the dialog box that displays, select the desired language and
COM port.
5 Click Load, then click Done.
6 Once the firmware is updated, the following message displays:
“100% Complete. Download completed successfully. Thank
you for using APEX products.”
7 The switch automatically reboots after the update is completed.