User's Manual

Apex OutLook 140DX/180DX Switch User Guide
39
USING OSCAR
SCANNING THE COMPUTERS
In scan mode, the switch automatically switches from port to
port (computer to computer). You can scan the entire system
sequentially or designate a custom scan pattern by specifying
computers and durations.
Placing the switch in scan mode
To place the switch in scanning mode:
1
From the Commands menu in the Advanced Menus screen,
highlight Scan.
2 Press ENTER.
Canceling scan mode
!
Press any key (except PRINT SCRN) or move the mouse; the
scan stops at the currently selected computer.
SCANNING THE COMPUTERS