User's Manual

Apex OutLook 140DX/180DX Switch User Guide
27
USING OSCAR
To open OSCAR or to access OSCAR
Selection Screen on a primary switch
1
Press PRINT SCRN.
To open OSCAR or to access OSCAR
Selection Screen on a secondary switch
1
Press PRINT SCRN to access OSCAR Selection
screen at the primary switch.
2 Highlight the number of the port you want to
access and press ENTER.
3 Press PRINT SCRN twice. The OSCAR Selection
screen at the secondary switch appears.
The factory defaults for OSCAR should not be
changed in a secondary switch because adjust-
ments can cause conflicts between the secondary
and the primary switch.
Note
If the factory settings have been changed, you can
restore them by selecting <F10> from your keyboard.
OSCAR SELECTION SCREEN