Service manual

APEX — Installation and Service Manual 103

Frame Settings

Frame Number Switch

Up to eight Apex chassis can be configured to operate as a single router.

The Frame rotary switch (

Figure 46) on the rear panel is used to indicate the

frame number. Settings are given in Table 5.

Figure 46. Frame Number Switch (Standard Apex Frame Version Shown)

Note Switch positions 5, 6, and 7 are not indicated on the switch label. These set-

tings are selected by counting the detents (clicks) as the switch is rotated

past 4. For example, two clicks past 4 would be 6.

Table 5. Frame Number Settings

Frame Number Standard Apex system Apex Plus system

0 Inputs/Outputs 1-256 Inputs 1-512

1 Inputs/Outputs 257-512 Inputs 513-1024

2 Inputs/Outputs 513-768 Inputs 1025-1536

3 Inputs/Outputs 769-1024 Inputs 1537-2048

4 Outputs 1-512

5 Outputs 513-1024

6 Outputs 1025-1536

7 Outputs 1537-2048

FRAME