How-To Guide

GlucoSure Link Blood Glucose Monitoring System
8
The GlucoSure Link Blood Glucose Meter
Test Strip Port
This is where you insert the test strip and the meter
will turn on automatically.
Meter Display
Shows your blood glucose test results, memory
values, averages, and other messages.
Enter (
) buttons
Press and hold Enter (
) for 2 seconds to turn on or
off the Meter, or press Enter ( ) to go into setup mode
when not testing (see page 14)
UP/DOWN ▲▼buttons
Press ▲ or ▼ to enter control mode with test strip
inserted (see page 24), during meter setting (see
page 14), or to navigate the stored test values and
averages (see page 43)