How-To Guide

GlucoSure Link Blood Glucose Monitoring System
43
Viewing Your Meter’s Memory
Your GlucoSure Link Blood Glucose Meter automatically stores up to 300 test and
control results with date and time. The meter also provides 7, 14, and 30 days
averaging to help track your blood glucose trend. You must set up the date and time
on your meter before using the memory and day averaging function, see Setting Up
Your New System on page 14. The meter will not memorize test or control results if
the date and time are not set.
Viewing Stored Readings and 7, 14, 30 Days Average from Memory
You will need:
• Your GlucoSure Link Blood Glucose Meter
Step 1.
Press and hold Enter ( ) to turn on the meter.
Step 2.
Press Enter ( ) to enter setup screen.
Step 3.
Press ▲ or ▼ until mem starts to ash. Press Enter ( ) to enter.