How-To Guide

GlucoSure Link Blood Glucose Monitoring System

Step 4.

Gently bring the test strip and touch the drop of blood at a slight

angle. The test strip acts like a straw to pull the blood in. Keep the

test strip in the blood drop until the meter beeps to indicate the test

strip has enough blood for testing.

Step 5.

The screen will start to count down. After 6 seconds, your glucose

testing result will appear on the meter display screen. Your test result

will be automatically stored into the meter memory.

CAUTION:

• If you see “HI” or “LO” displayed, your blood glucose level may be above 600 mg/

dL (33.3 mmol/L) or below 20 mg/dL (1.1 mmol/L). Test again using ngertip testing,

DO NOT test on forearm or palm. If you still receive the same result, call your

physician or healthcare professional immediately.

If test results do not match with how you feel:

• Make sure you have performed the test correctly. Then, conduct a glucose control

test to check that the system is working properly. Repeat the test using a blood