How-To Guide

GlucoSure Link Blood Glucose Monitoring System

Testing Your Blood Glucose

You will need:

• Your GlucoSure Link Blood Glucose Meter

• A new GlucoSure Link Blood Glucose Test Strip

• Lancing device with a clean, unused lancet (or safety lancets)

• Clear cap for Alternate Site Testing (AST) on palm and forearm

Before you begin, make sure:

• To set up your meter properly and run a control test. See Setting Up Your New

System and Control Solution Testing for details.

• Wash your hands and the testing site thoroughly with soap and warm water, and

dry well.

• You are testing in an area between the temperature ranges of 50°F~104°F. Your

meter will not test outside of this range and will display thermometer icon. Move the

meter into an area that is between 50°F~104°F, and let it sit for 10 to 15 minutes

before testing again.

• If the meter is being operated by a second person who is providing testing

assistance to you, the meter and lancing device should be cleaned and disinfected

appropriately when testing is conducted by the second person.