How-To Guide

GlucoSure Link Blood Glucose Monitoring System
22
Setting Beeper Function
The default setting for the beeper function is on, and can be switched off to conserve
battery power.
You will need:
• Your GlucoSure Link Blood Glucose Meter
Step 1.
Press and hold Enter ( ) to turn on the meter.
Step 2.
Press Enter ( ) to go into setup screen. Press ▲or▼ until start to ash. Press
Enter ( ) to enter beeper setting.
Step 3.
Press ▲or▼ to turn on or off the beeper, and then press Enter ( )
again to exit beeper setting.