How-To Guide

GlucoSure Link Blood Glucose Monitoring System
12
The GlucoSure Link Blood Glucose Test Strip
The GlucoSure Link Blood Glucose Test Strips are glucose specic, biosensor-
based test strips that require very little blood sample to quickly test glucose in fresh
capillary whole blood. The test results are plasma-calibrated for easy comparison to
lab results, however, results may be 10% to 15% higher than results obtained from
whole-blood referenced blood glucose assays. The test strip is also equipped with
under-ll detection to alert you when there is not enough blood to perform a test, so
you can be assured that every reading you get is an accurate and meaningful result.
IMPORTANT:
• Immediately close the vial cap of the test strip bottle tightly after each use. Keep
the unused test strips in its original bottle. DO NOT leave any test strips outside the
bottle while not in use.
• DO NOT reuse test strips. Test strips are for single use only.
• Carefully discard used test strips and lancets in proper waste containers.
• Be sure to use only the GlucoSure Link Blood Glucose Test Strip with the
GlucoSure Link Blood Glucose Meter. Other brands of test strips will not work with
the meter.
Contact Points
Insert this end to the test
strip port on the meter
Sampling End
Apply blood or control
solution here