User's Manual

6–29
10004880 Rev. D1
Chapter 6. The Web GUI
• Maximum LCP echo failure retry — Specify the maximum number of times to retry
sending the LCP echo request if no replying packet is received.
• Maximum Transmit Unit (MTU) — Specify the maximum transmit size for a PPP
packet.
• Van Jacobson compression — Disable or enable Van Jacobson TCP/IP header com-
pression. (By reducing the size of the TCP/IP headers to as few as three bytes, Van
Jacobson compression can be a significant improvement on slow serial lines, par-
ticularly for interactive traffic.)
At the Subscriber level, the read-only PPPoE/PPP Configuration page shown in Figure 6-27
is available.
Figure 6-27 PPPoE/PPP Configuration Page, Subscriber Level