User's Manual

Chapter 6. The Web GUI
6–28
10004880 Rev. D1
PPPoE/PPP Configuration
The PPPoE/PPP Configuration page shown in Figure 6-26 is available at the ISP access
level when PPPoE is enabled. It is available only at the ISP logon level.
Figure 6-26 PPPoE/PPP Configuration Page, ISP Level
The PPPoE/PPP section includes the following PPPoE read-only client parameters:
• PPPoE Client Support Enable — Always enabled when this page is available.
• PPPoE Service Name and Access Concentrator Name — Optional fields set using the
Configuration Manager that can be used to identify an Access Concentrators.
The PPPoE/PPP section also includes Start and Stop buttons; use these buttons to start
or stop a PPPoE session.
The PPP section includes the following PPP client parameters:
• User name for authentication and Password for authentication — Specify the user
name and password for login to a remote ISP network
• Interval for LCP echo request — Specify how often Echo-Request messages are sent
on idle links to check the viability and integrity of the link.