User's Manual

Chapter 6. The Web GUI
6–24
10004880 Rev. D1
Use these pages to configure DHCP parameters as appropriate for the subscriber’s LAN.
To move between the DHCP configuration pages, click on the hyperlinks at the top of the
pages.
DHCP configuration should be performed by a network administrator.
On the DHCP Configuration page, specify IP Address Start and IP Address End which will
define the DHCP address range (required), and any other configuration parameters as
desired; then click Submit.
On the DHCP Records page, assign and configure any individual IP address(es) as desired;
then click Submit.
To make the DHCP configuration part of the Subscriber Unit’s permanent configuration,
use the Upload Configuration function (page 6-30).
Figure 6-22 DHCP Leases Page