User's Manual

6–17
10004880 Rev. D1
Chapter 6. The Web GUI
Figure 6-13 Downstream Default Best Effort Configuration Page
Routes Configuration
If the Subscriber Unit supports routing, the Routes Configuration pages allow subscribers
to construct a routing table for the Subscriber Unit. These pages are accessible only when
the Subscriber Unit is in routing mode, and are fully configurable at the Subscriber and
ISP logon levels.
Route configuration should be performed by a network administrator.
Figure 6-14 shows the Routing Table page, which list all routes defined for the Subscriber
Unit.
To add a route, click on the Add Routes button; enter the route information on the Add
Routes page (Figure 6-15), and click the Submit button.
To delete one or more routes, click on the Delete Routes button; on the Delete Routes page
(Figure 6-16), click the Delete box for each route to be deleted, and click the Submit but-
ton.
To make the routes configuration part of the Subscriber Unit’s permanent configuration,
use the Upload Configuration function (page 6-30).