User's Manual

6–5
10004880 Rev. D1
Chapter 6. The Web GUI
Submitting and Uploading Changes
Pages on which configuration changes can be entered include a Submit button at the bot-
tom. Any change entered on the page does not take effect until the Submit button is
clicked.
Clicking Submit affects only the operating configuration of the SU. The SU’s configuration
file located on the BSU’s TFTP server is not altered; therefore, the configuration change
will be lost if the SU is reset or re-powered (after which the SU reverts to the configuration
specified in its configuration file).
To update the SU’s configuration file on the TFTP server with changes made via the Web
GUI, use the Upload Configuration button on the Device Control Utility page (page 6-30).
Clicking the Upload Configuration button will cause all configuration changes currently in
effect to be written into the SU’s configuration file on the TFTP server.
Cancel and Refresh Buttons
Some pages include Cancel and/or Refresh buttons at the bottom.
• Clicking on the Cancel button cancels any changes made on the page; altered fields
will return to their original contents.
• Clicking on the Refresh button refreshes all fields with configuration parameters
downloaded from the TFTP server.
Hyperlinks
Some Web GUI pages include hyperlinks to related pages. For example, the Routing Table
page includes hyperlinks to pages for adding and deleting routes. Hyperlinks are indi-
cated in the method defined in your browser configuration.
In some cases, hyperlinks are implemented using buttons similar to the Submit button.
For example, the Routes Configuration page includes buttons which serve as hyperlinks
to pages for adding and deleting routes.
Overview of SU Web GUI Functions
Table 6-A summarizes the functions available for each of the Main Menu and Submenu
selections.