User's Manual

Chapter 5. The PacketWave AIM
5–6
10004880 Rev. D1
Downloading the BSU’s IM.DAT File
When BSU configuration is performed using the Configuration Manager (CM), the IM.DAT
database file is generated. This file records basic parameters for all configured BSUs:
BSU config file name
•BSU name
•Sector name
Channel width
Channel frequency
•Broadcast polarization
•BSU diversity
•SR ratio
•Frequency band
The Configuration Manager has an option to copy the IM.DAT file to a diskette.
The Installation Manager allows the IM.DAT file to be downloaded from the computer to
the PacketWave 200. The PacketWave 200 will then load all of its configuration parame-
ters automatically from the IM.DAT file once the SU’s BSU and sector are selected.
To download the IM.DAT file to the PacketWave 200:
6. Click on the Import CM database button in either the Install Option or Configuration
window.
7. The Import CM Database window shown in Figure 5-4 will appear. Specify the Data-
base file path (the location of the IM.DAT file) and click on Import.
8. Wait for the indication that the file has been downloaded.
.
Figure 5-4 Import CM Database Window