User's Manual

4–5
10004880 Rev. D1
Chapter 4. Subscriber Equipment Installation
To mount an Outdoor Unit on a pole using the alternate bracket shown in Figure 4-4:
1. Locate the appropriate mounting holes for the alternate bracket on the back of the
ODU.
2. Attach the mounting bracket to the ODU using the four screws provided.
3. Remove the two bolts that hold the pole clamp closed.
4. Position the clamp around the pole in the desired location. Install and tighten the
clamp bolts to secure the clamp to the pole.
5. Adjust the azimuth and elevation orientation of the radio/antenna as necessary by
loosening the appropriate nuts, repositioning the ODU, and tightening the nuts.
Figure 4-4 Alternate ODU Mounting Bracket