User's Manual
Table Of Contents
Cā1
10004880 Rev. D1
Appendix
C
Diagnostic Manager
The Diagnostic Manager utility supports a range of diagnostic functions designed to help
isolate Subscriber Unit problems under direct supervision by Aperto personnel. It is not
intended for general use by subscribers or service providers.
Loading the Diagnostic Manager Software onto the PC
To load the Aperto Installation Manager (AIM) software onto the PC to be used to run the
Diagnostic Manager:
1. Obtain the CD distributed with your PacketWave 200 equipment, which includes
the Diagnostic Manager (DM) software plus Java software from SUN Microsystems.
2. If the Java Runtime Environment is not present on the PC, install it from the
PacketWave distribution CD (bsu/Software/Application/Support directory) or the
java.sun.com web site.
3. Run the file
setup.exe
from the /Software/Application/DiagnosticManager/<OS> direc-
tory (where
<OS>
is the operating system being used, such as
win32
). At the end of
this installation, a Diagnostic Manager icon will be placed on the PCās desktop.
NOTE: Diagnostic (DM) is now combined with AIM. It does work with the same
interface protocol as AIM and therefore is included in the same package.
Running the Diagnostic Manager
To use the Diagnostic Manager:
1. Connect the PC to the PacketWave 200 as described under Connecting to the Pack-
etWave 200 on page 5-2.