User's Manual
Table Of Contents
2–3070-20000330-01 Rev A
C
HAPTER
2. O
VERVIEW
Indoor Unit
The PacketWave 100 Series Indoor Unit is a bridge/router which, together with the
Outdoor Unit, connects the subscriber’s computer(s) to the wireless service. The first
available model, the PacketWave 130 supports bridging and NAT modes, as shown in
Figure 2-3. IP routing will be supported in the next major software release.
On the radio/antenna side, the Indoor Unit has two interfaces:
• A port for wireless traffic (which also provides power to the Outdoor Unit).
• A port for controlling the radio/antenna.
On the subscriber side, the Indoor Unit has an auto-negotiating 10/100Base-T Ethernet
port. The Indoor Unit plugs into a standard ac wall plug (120 or 220 volts). A power
cord with transformer is provided with the unit.
Figure 2-3 PacketWave 130 Indoor Unit
Bridging Mode
NAT Mode