User's Manual

Chapter 5. The PacketWave AIM
5–16
10004880 Rev. D1
Viewing Status of the Wireless Link (Link Status Mode)
To view link status:
1. Go to the Install Option window (Figure 5-3) in one of two ways:
• Perform steps 1 through 5 under Using the Aperto Installation Manager on
page 5-3.
• After completing an AIM mode, click on the Previous button until the Install
Option window is displayed.
2. Select Link Status and click on the Next>> button.
3. The Link Status window shown in Figure 5-18 will be displayed, showing local sig-
nal strength (as received by the SU) and remote signal strength (as received and
reported by the BSU) over time.
4. Click on the Next>> button when you are finished viewing the link status. The Install
Options window (Figure 5-3) will be displayed.
Figure 5-18 Link Status Window for PacketWave 200