User's Manual

5–15
10004880 Rev. D1
Chapter 5. The PacketWave AIM
Re-aligning the Antenna (Continue with Setup Mode)
The Continue with Setup option on the Install Option window provides direct access to
the antenna alignment function (Alignment page) without going through the configuration
steps.
To align the antenna using the Continue with Setup mode:
1. Go to the Install Option window (Figure 5-3) in one of two ways:
• Perform steps 1 through 5 under Using the Aperto Installation Manager on
page 5-3.
• After completing an AIM mode, click on the Previous button until the Install
Option window is displayed.
2. Choose Continue with setup and click on the Next>> button.
3. The Configuration Window will be displayed, showing just the MAC address as
shown in Figure 5-17. Click on the Next>> button.
4. The Alignment Window will be displayed, as shown in Figure 5-10.
5. Perform the steps under Aligning the Antenna on page 5-11.
Figure 5-17 Continue with Setup: Configuration Window