User's Manual

5–13
10004880 Rev. D1
Chapter 5. The PacketWave AIM
b. When the PacketWave 200 has reset, the window shown in Figure 5-13 is dis-
played. This window shows the current state of the unit, the radio gain, and
transmit attenuation, and is refreshed periodically.
Figure 5-13 Device State Window
c. Next, the AIM performs a standard ping test with the BSU, displaying the win-
dow shown in Figure 5-14.
Figure 5-14 Performing Ping Test Window
d. After the ping test, the AIM performs a throughput test (an FTP transfer of 1
megabyte of data up and down the wireless link), displaying the window
shown in Figure 5-15.
Figure 5-15 Performing Throughput Test Window