User's Manual

10004880 Rev. D1

Preface

This manual is part of the documentation for the PacketWave broadband wireless system

for delivering high-speed subscriber services. The PacketWave documentation set

includes:

• PacketWave 1000 Base Station Unit Installation, Configuration, and Operation

Manual: part number 10002690.

• PacketWave 100 Series Subscriber Equipment Installation and Operation Manual:

part number 10002689.

• PacketWave 200 Series Subscriber Equipment Installation and Operation Manual:

part number 10004880.

Scope of This Manual

This manual documents the installation and operation of the PacketWave 200 Series sub-

scriber equipment with software version 4.1.

This manual provides the following information:

•A

QuickStart

section for rapidly placing PacketWave 200 Series subscriber equip-

ment in operation.

• Descriptions of the PacketWave 200 Series hardware components.

• Complete site planning and installation instructions for PacketWave 200 Series

subscriber equipment, including the indoor bridge/router unit and the outdoor

radio/antenna unit.

• Descriptions of the PacketWave 200 Series software components, including the

Web GUI and the Aperto Installation Manager, and instructions for using them.

• IP addressing guidelines for the local PC(s).

• Procedures for initializing the PacketWave 200 Series subscriber equipment.

Complete descriptions of the PacketWave System, its components, the installation of the

cell site equipment, and overall system configuration and operation are provided in the

PacketWave 1000 Base Station Unit Installation, Configuration, and Operation

manual.