User's Manual

4–9
070-20000750-01 Rev A
Chapter 4. Subscriber Unit Web GUI
SNMP Configuration
As shown in Figure 4-7, the SNMP configuration page allows the viewing and altering of
SNMP parameters for one or two SNMP managers:
• Whether traps will be generated.
• What SNMP manager(s) will be recognized, what access rights they will have, and
the read and write community names.
Click on the Submit button to activate any changes made on this page.
NOTE: This page does not support deletion of SNMP managers.
This page is available only at the ISP logon level.
Figure 4-7 SNMP Configuration Page
Default Best Effort Configuration
All Subscriber Units have a default Best Effort service flow. Performance parameters of the
default upstream and downstream service flows are configurable using the Advanced
Installation Manager. Configuration pages for default Best Effort service flows are shown
in Figure 4-8 and Figure 4-9. All fields are read-only.
These pages are available only at the ISP logon level.