User's Manual

Chapter 1. Overview
1–6
070-20000750-01 Rev A
4. Connect the other end of the grounding conductor to an appropriate earth ground
using a grounding clamp.
If you install a grounding electrode separate from the power service grounding elec-
trode system, connect the separate electrode to the grounding system in accordance
with the National Electrical Code (NEC) and local electrical codes.
Figure 1-4 Grounding the Outdoor Unit (Radio/Antenna)
Connection to
Radio/Antenna
Ground Lug
Grounding Conductor
(NEC Section 810-21)
Grounding Clamp