User's Manual Part 1

2–15
070-20000750-01 Rev A
Chapter 2. Installation and Configuration
parameters are sent to the PW610. Next the unit is reset. This takes a few minutes of time
and you will see the popup window below.
The following window will display when the PW610 has reset and it receives the first syn-
chronization from the PW620. It is periodically refreshed and shows the current state of
the unit and the radio gain and attenuation from maximum transmission.
There is nothing you can do to help or hinder this process. It will proceed automatically.
AIM requests a ping test between the PW600 units once the unit becomes operational.
Then the following will be displayed. This is to signify that the unit is operational and the
ping tests have completed. It make take a few minutes to complete the throughput tests