User's Manual Part 1

2–11
070-20000750-01 Rev A
Chapter 2. Installation and Configuration
been selected for a system, the questions no longer need to be asked. The rest of the
screen is also simplified also.
Figure 2-9 Configuration Window for the PW610
Enter the same frequency as you did on the PW620 configuration. These must match
exactly.
Enter the IP address, subnet mask, and default gateway of the PW610. Remember this IP
address should be in the same subnet as the PW620 or the ping and through-put tests of
AIM will not complete.
Finally, enter the antenna polarity. Here are the general rules:
• The PW620 is set to Vertical; set the PW610 to Vertical
• The PW620 is set to Horizontal; set the PW610 to Horizontal
• The PW620 is set to Vertical with diversity or Horizontal with diversity; set
thePW610 to diversity.
A more complete description of diversity is given later.
Click on the Next button to proceed and skip the next step and proceed to Antenna Align-
ment;