User's Manual Part 1

Chapter 2. Installation and Configuration
2–8
070-20000750-01 Rev A
AIM signifies the completion of the work by displaying a Result window as show in
Figure 2-6.
Figure 2-6 Result Window of the Installation of a PacketWave 620
You may now use the Previous button successively to return to the Authentication window
to proceed to the installation of the PW610 or you may click on the Exit button to end the
program. AIM has a warning to ask if you really want to exit. This is shown in the graphic
below
Figure 2-7 Exit Warning WIndow
WARNING: The high speed bridge mode technology of the PacketWave 600 series
causes it to remember which interface was connected to a particular PC.
When you use AIM to configure the PW620, the PW620 believes the PC
is connected to its LAN interface. If you use the same PC to run AIM on
the PW610, the system may get confused since the PC will now appear