User's Manual Part 1

1–11
070-20000750-01 Rev A
Chapter 1. Overview
Ethernet 10/100 Base-T Connection
To connect the Indoor Unit to Ethernet device.
1. Provide an appropriate Cat 5 Ethernet cable with an RJ45 male connector at each
end. Use a straight-through cable for connection to a hub or router. Use a crossover
cable for connection directly to a computer.
2. Plug one end of the Ethernet cable into the RJ45 socket labeled 10/100Base-T on
the Indoor Unit, as illustrated in Figure 1-8.
The Radio Control connector of the Indoor Unit has the same physical appearance
as the 10/100Base-T connector. Make sure you connect to the right one.
3. Plug the other end of the Ethernet cable into the socket on the local Ethernet
device.
Figure 1-8 Ethernet 10/100 Base-T Connection
To computer’s Ethernet
port or Ethernet hub