User's Manual Part 1

1–1
070-20000750-01 Rev A
1
Overview
This chapter outlines the basics of the PacketWave 600 Series hardware, software, and
installation.
Hardware
There are two models in the PacketWave 600 Series. For each link, the PacketWave 620 is
the master (also refer to as the base station) and the PacketWave 610 is the slave (also
refer to as the subscriber unit). Although they have different hardware and software inter-
nally, they looks the same from outside except for the model number on the back panel.
Each PacketWave 600 Series equipment consists of an Outdoor Unit (radio/antenna), and
an Indoor Unit (bridge), as shown in Figure 1-1.
Figure 1-1 PacketWave 600 Series Equipment
Outdoor Unit
(Radio/Antenna)
Indoor Unit
(Bridge)