User's Manual
Table Of Contents
- Scope of This Manual
- Conventions Used in This Manual
- Intended Audience for this Manual
- General Cautions and Warnings
- QuickStart Guide
- Overview
- Site Planning
- Outdoor Unit Installation
- Indoor Unit Installation
- Starting Up
- Management Interfaces
vii070-20000330-01 Rev A
P
REFACE
This manual is part of the documentation for the PacketWave broadband wireless sys-
tem for delivering high-speed subscriber services. The PacketWave documentation set
includes:
• PacketWave 1000 Base Station Unit Installation, Configuration, and Operation
Manual: Part 070-20000340-01
• PacketWave 100 Series Subscriber Equipment Installation and Operation Man-
ual: part 070-20000330-01
S
COPE
OF
T
HIS
M
ANUAL
This manual provides the following information:
•A QuickStart section for rapidly placing PacketWave subscriber equipment in
operation.
• Descriptions of the PacketWave 100 Series hardware components, including
the Indoor Unit (bridge/router) and the Outdoor Unit (radio/antenna).
• Complete site planning and installation instructions for PacketWave 100 Series
subscriber equipment, including the indoor bridge/router unit and the outdoor
radio/antenna unit.
• Descriptions of the PacketWave 100 Series software components, including the
Web GUI and the CPE Installation Tool (antenna pointing utility), and instruc-
tions for using them.
• IP addressing guidelines for the local PC(s).
• Procedures for initializing the PacketWave 100 subscriber equipment.
Complete descriptions of the PacketWave System, its components, the installation of
the cell site equipment, and overall system configuration and operation are provided
in the PacketWave 1000 Base Station Unit Installation, Configuration, and Operation
manual.