User's Manual
Table Of Contents
- Scope of This Manual
- Conventions Used in This Manual
- Intended Audience for this Manual
- General Cautions and Warnings
- QuickStart Guide
- Overview
- Site Planning
- Outdoor Unit Installation
- Indoor Unit Installation
- Starting Up
- Management Interfaces
C
HAPTER
7. M
ANAGEMENT
I
NTERFACES
7–14070-20000330-01 Rev A
F
AULT
R
EPORTING
The PacketWave subscriber equipment can be configured to report events by several
means:
• Email event messages.
•SNMP traps.
• Logging to a Syslog server.
• Event logs presented on request via SNMP or Web GUI.
Reportable events are identified in Table 7-B.
Table 7-B Events Reported
Fault Event Description
Cold Start Indoor Unit has performed a full hardware boot.
Warm Start BSU has performed a software reboot.
Authentication Failure Invalid user name or password?
CPE Up Indoor Unit has started communication with the BSU.
CPE Down Indoor Unit has ceased communication with the BSU.
DHCP Failed A failure has occurred in the retrieval of required data from the DHCP server.