User's Manual
Table Of Contents
- Scope of This Manual
- Conventions Used in This Manual
- Intended Audience for this Manual
- General Cautions and Warnings
- QuickStart Guide
- Overview
- Site Planning
- Outdoor Unit Installation
- Indoor Unit Installation
- Starting Up
- Management Interfaces
3–1070-20000330-01
3
S
ITE
P
LANNING
There are three basic site-planning issues which must be decided before you begin
installation:
• Location of the Indoor Unit (bridge/router).
• Location and mounting method of the Outdoor Unit (radio/antenna).
• Cable path between the Indoor Unit and the Outdoor Unit.
L
OCATION
OF
THE
I
NDOOR
U
NIT
(B
RIDGE
/R
OUTER
)
Typically, the Indoor Unit is located near the subscribers hub or computer. However,
the Ethernet cable to the local computer or hub can be up to 330 ft (100 m) in length.
CAUTION: Make sure that the Indoor Unit is installed in a room with tem-
perature and humidity controls such that the temperature
remains between 32 and 104 °F (0 and 40 °C) and the humidity
remains between 10% and 90% noncondensing.