User's Manual

8–17070-20000340-01 Rev A
CHAPTER 8. MANAGEMENT INTERFACES
Using the Subscriber Indoor Unit’s Web GUI
The subscriber Indoor Unit’s GUI may be accessed via the BSU Web GUI (see
Figure8-2 and Figure8-3), or by directly addressing the subscriber Indoor Unit
(http://<wireless interface IP address>/cpe.htm). In either case, a new network con-
nection is being requested, so the system prompts for a user name and password.
Respond to each prompt with Aperto.
NOTE: The user name and password are case-sensitive
The subscriber (CPE) home page is illustrated in Figure8-19. It provides access to a
range of pages similar to those for the Base Station Unit.
As shown in Figure8-19, the subscriber (CPE) home page provides a graphical rep-
resentation of BSU-to-subscriber equipment connectivity. The arrow pointing to the
subscriber Indoor Unit icon indicates wireless channel status: green if good or red if
down.
Status indications on the connectivity view are updated dynamically every 30 sec-
onds.
Figure8-19 Subscriber Home Page: Connectivity View