User's Manual

CHAPTER 6. BSU AND S UBSCRIBER CONFIGURATION
6–20070-20000340-01 Rev A
Figure6-8 MAIN — Server IP Menu
Table6-H BSU — MAIN — Server IP Parameters
Parameter Range
(and Default)
Comments
TFTP Server IP N/A Non-configurable field.
Time Server IP N/A Non-configurable field.
Syslog Server xxx.xxx.xxx.xxx decimal
(no default)
If the BSU is to log event messages to a Syslog
server, enter its IP address. (If a Syslog server is
identified in the DHCP server, this address will be
overridden.)
SMTP Server xxx.xxx.xxx.xxx decimal
(no default)
If the BSU is to send email alert messages, enter the
SMTP server’s IP address. (If an SMTP server is
identified in the DHCP server, this address will be
overridden.)
DHCP Server for CPE xxx.xxx.xxx.xxx decimal
(no default)
If subscribers are to use a different DHCP server
than the BSU, specify the subscribers’ DHCP server
here. (This address will be the DHCP server known
by the BSU’s DHCP relay agent.)